Read 1 Customer ReviewsWrite Your Own Review
- Great sight Review by Ben
Quality Price Value
This sight works perfectly. The only con I have found is the screws felt cheap and I even rounded out the head on the set screw for the windage block. I replaced and most of the other screws while I was at it just because, and I have had no problems since.
The magnification on the scale reader is a nice touch and is nice and clear. The clicks on the elevation and windage are precise, but feel tight at first but they loosen after a bit and work really good.
There are no instructions but it is pretty straight forward. Level out the elevation housing, then the scope, and then the third axis. The hamskea 3rd axis leveling tool would work great for this, I made my own modeled after it and it makes setting up this sight a breeze. I put mine on the riser block that comes with the sight and it works alright. I did not have to move the sight block on the elevation riser though if you need to you can, there are three positions. In the pictures it looks like it is on the middle so you can still move it up or down.
(Posted on 4/25/16)