Call a TechXPert™ 855.922.7769

Live TechXpert™ Help

Talk to a TechXpert about Beiter Compound Arrow Rest

Click Here to Chat with a TechXpert™

Beiter Compound Arrow Rest

SKU# 1370131


Item # 1370131

Catalog Page # 152

You can still order this!

view similar products

* Required Fields

Product Description
Product Description
• Horizontal and vertical movement without any fixation screw. The rest can be adjusted without loosening or tightening any screw!
• Highest precision, thanks to a revolutionary concept: the rest can be adjusted without tolerances and play, with a precision not known until today.
• Re-produceable settings: both the vertical and the horizontal millimetric scale have a Vernier scale (like a caliper). Thanks to that, the Rest can be
adjusted with a precision of 0,2mm! The setting can be reproduced, resulting in the arrow rest to have zero play.- the launcher can be set in 2
different angles - 30° or 35° - by changing two little blocks. So the angles can be re-set precisely.
• Guidance plates with bulge: plates with different lengths can be installed on top and bottom of the launcher. These will change the stiffness of the
launcher and avoid any oscillation after the shot, which most of the time is the reason of bad clearance. The bulge on the plates gives the launcher
the chance to follow the horizontal path of the arrow leaving the bow.
• Stainless steel 5/16“-24 screw with flat head and large diameter. The Spacer made out of a special plastic allows to fix the screw better. A counter
screw with an elastomer pad avoids any marking on the bow handle.
• Different launcher sizes and thicknesses will be available to fit various arrow diameters and weights.
• the profile of the arrow rests mounting block may not fit every handle (at the moment the Hoyt Carbon Matrix is the only bow not accepting the rest)

• Includes:
1 Beiter Compound Rest with 2 launchers, including 2 inclination blocks (30°, 35°)
1 hex wrench for horizontal and vertical settings
1 stainless steel screw 5/16“-24 with spacer and a counter screw with elastomer pad
1 set of guidance plates with bulge: 22, 26, 30mm

Customer Reviews

Customer Reviews

Read 2 Customer Reviews

Write Your Own Review
Excellent but not perfect Review by Galak

OK, this is a Beiter product, built under the German quality standard : strong and rigorous. The vernier scale is actually a plus to keep and refine setup from a shaft to an other. Also, the blade mounting device allow a repeatable setup BUT the blades, and especially the blade rigidity spacers are not the best thing on this rest. Getting a good arrow clearance is quite hard with them. Modifying a best launcher blade to fit it without the spacers allows to get a better clearance.

(Posted on 12/15/11)

An excellent target rest Review by Scott Pankhurst

Like all Beiter products this just works. The adjustment is superb with the included key - easy to move, nothing to lock or unlock, but no chance of accidental movement either. The rest does look bulky but most of it is delrin so it's only factionally heavier than a TT2 Micro. The best part is the blade clamp mechanism, which allows blade changes with perfect return-to-zero. My only criticism is that the only blade widths available are 4 and 5mm, which is way too small for indoor alloys. I slightly modified a wide TT2 blade to fit. Hopefully Beiter will bring out something like an 8mm blade if enough people ask.

(Posted on 8/15/11)

Write Your Own Review

Write Your Own Review

You're reviewing: Beiter Compound Arrow Rest

Log in to access this form without a captcha.

* Required Fields