Call a TechXPert™ 855.922.7769

Bitzenburger Fletching Jig

SKU# 1430002

$89.99

Item # 1430002

Catalog Page # 109

The last fletching jig you will need to buy!
Full Description
TEMPORARILY OUT OF STOCK
You can still order this!

view similar products

Bitzenburger

* Required Fields

$89.99
Product Description
Product Description
Bitzenburger’s Fletching Jig has long been the choice of do-it-yourself archers. With it, you can put three or four fletchings on any arrow shaft. The large dial keeps the spacing between fletchings perfect every time. Allen screws on the top and bottom of the clamp magnet allow adjustments to the angle of fletchings. Best of all, the jig is all metal, which means it’s a snap to clean off glue residue.

• Constructed of die cast alloy, all metal parts
• Self-supporting fletching tool features a strong permanent magnet which allows for very precise and uniform placement of all feather and vanes
• Self-centering shaft cradle will accept and center any size shaft available today
• Large dials at the top and bottom of the magnet holder make it easy to adjust your angle of fletching within seconds, to fletch straight, offset or true right or left helical
• Feather spacing of 120 degrees 3 fletch, 75 degrees x 105 degrees 4 fletch, and 90 degrees 4 fletch can be selected by a slight screw adjustment. • Optional nock receivers available to achieve 60 degrees x 120 degrees 4 fletch or 120 degrees 3 fletch cock vane down or up
• The clamp is help at a 45 degrees angle so the arrow maker will have a clear view of the fletching at all times
• Comes complete with wrenches and instruction sheet
Related Resources



Customer Reviews

Customer Reviews

Read 18 Customer Reviews

Write Your Own Review
Good product with one issue Review by Hunter
Price
Value
Quality

I bought this jig for my first attempts at doing my own fletching and they came out really well. One issue I had was with the highest degree of helical. When you set the jig in position for the hightest degree of helical (I was using right helical), the clamp slides off/away from the arrow shaft and is not held fast by the magnet like it is for a lesser helical position. Thus, I had to hold the clamp down manually, but still could not get a perfectly flush fletching every time. This is only an issue with an outrageous degree of helical, (which I have found to perform only as good as the standard helical for the most part) but it is a minor detail that could be improved. Otherwise, the jig is sturdy and easy to use.

(Posted on 9/28/18)

Excellent product! Review by Nick
Quality
Price
Value

I have been using an easton fletching jig (the orange one that fletches all three vanes at the same time) for a while, as these more advanced jigs just looked more complicated. I wish I had started using this way sooner! It is very easy to use, and has a lot of adjustment ability (where the vane sits on the arrow, how much offset, etc). Yes, it does take 3 times as long to fletch an arrow since you are only gluing one vane at a time, but the jig does a way better job of fletching. With the simple jig I often had one vane that was skewed, or didn't sit flush on the arrow, as well as often having glue all over the shaft from the wet glue making contact and then moving as the jig settled in. With this, every arrow has come out perfect. I do wish that it came with both the straight and helical clamp, but I can just buy the helical clamp later. Highly recommended

(Posted on 7/5/18)

Great product Review by woof156
Price
Value
Quality

I got an old Bitzenburger from an archery shop going out of business. It had lots of miles on it, fletched who knows how many arrows. Had to clean it up a bit, and made a few minor adjustments for my arrow shaft diameter and it is dead bang on. Fletches perfectly. I came to this jig from the bohning tower which is nice but often feathers are misaligned and you don't know that till you take the thing down-- i.e. feathers are set. With this jig you can see it before you glue it and it cleans up like a dream. Tho old and weathered this bitzi does it job so longevity is in its genes. Yeah a bit slower than the tower but then so what...... this is a great jig you can pass down to your kids and their kids....

(Posted on 6/10/18)

Chose the right jig Review by DMike64
Price
Value
Quality

I was going to take a bunch of arrows out to LAS to have them refletched and ended up buying this jig instead. I discussed with Dustin the sales tech and he highly recommended the Bitzenburger. I mentioned some reviews I read that it's not easy to get started using it so he suggested refletching some of my arrows so he could demonstrate. He set me up with everything I needed and I ended up doing over a dozen arrows (FMJ's and Carbon Express Predators) that evening. I did have to redo the 2nd arrow, but from then on I got the hang of it and the rest of the arrows look great and shoot well. I can see how it could be intimidating to use this with no previous experience, but watch the video on the LAS website, or better yet if you can get to the store they will help you. First impression is great product and worth the cost. As always, great customer service at LAS.

(Posted on 6/2/18)

Great tool , easy to learn, it work well for me. Worth money. Review by Tom
Quality
Price
Value

Great tool , easy to learn, it work well for me. Worth money.

(Posted on 3/21/18)

First time Fletching Review by David
Quality
Price
Value

Having never fletched an arrow before using this Bitzenburger jig I was a little nervous. And I see that other reviewers were slightly overwhelmed by the jig. However, I found it all pretty simple to setup. I started out with some junk arrows that I wasn't worried about the outcome and even they came out perfectly. This jig is actually pretty darn simple to use. I like that it's made of metal, and will probably be the first and only jig I ever need. Which is why I bought it to begin with. The instructions were thorough, but not extremely extensive, and I'm sure that one search of youtube would help me with any questions anyone would ever have. I'm pleased with this jig to say the least.

(Posted on 12/10/17)

Bullet Proof Review by Benjamin DiMaggio
Quality
Price
Value

This thing is bullet proof... the clamp is metal and is easy to clean. Highly recommend this jig. Blazer installation is a breeze.

(Posted on 9/10/17)

Works perfectly Review by Jack
Value
Quality
Price

I may have scored this product a little low just because of the manufacturing process and finishes are just rough. I would have gladly paid more for a finer finished or powder coated product. the casting marks have been filed down not to cut anyone but there is room of improvement. does the product work...Heck yes!! I have fletched dozens of arrows and it works great.

(Posted on 11/9/16)

It simply works Review by Salter
Quality
Price
Value

Tried a cheaper plastic jig, and lack of clamp heft made it difficult to have an even contact between the vane and the arrow. This was especially important for my Easton X7's aluminum shaft and 3" vanes. I switched to the "Bitz" and immediately understood why this is a de-facto standard for so many years. Heft and magnet strength made the process feel precise. This tank deserves its reputation.

(Posted on 11/4/16)

Confusing product Review by Timothy Foley
Quality
Price
Value

I bought Bitzenburger because of its excellent reviews and this particular fletching jig because I wanted to be able to fletch left, right, and straight. When the jig arrived, the two allen wrenches, screws, springs, and metal ball bearings that control the nock receiver were loose both in the jig's own box AND in the box it was shipped in. It wasn't clear until I examined the instructions that nothing had been lost. I was impressed everything was still there because the screws, springs, and ball bearings are tiny.

This is my first fletching jig and the instructions are not helpful. There are pictures but they are not helpful in showing you if you've done everything correctly. There is nothing to show you how the dials are used to adjust the angle. You are just left on your own to adjust them as you think they should be. I guess I did it correctly because my arrows all fly well and fletchings don't come off but, if I change the dials, I have to mark the jig in some way so that I know where the dials were previously. Except for a mark on the dials where extreme right and left are as well as on the jig where center is, the dials lack measurements to indicate how much the dials are turned or if the two are even complimenting each other.

I feel like I should have waited for someone to explain the jig to me before I bought it, or I should have spared myself the questions and ordered 1 jig for helical and another jig for straight instead of an all-in-one product. When I showed it to others who have fletched arrows for years, they said jig is too complex.

But it is metal and sturdy. Aside from how it was shipped to me, it shouldn't fall apart in your hands. It is easy to clean. I keep the jig in the box when it isn't in use. There is no place on the jig to attach/store the allen wrenches but the box has enough available space to keep a small container in it.

sturdy product but too many moveable pieces for a newbie.

(Posted on 8/1/16)

for the best, seems to have some faults Review by Seode
Quality
Price
Value

I do like the bitz jig. I dont know why they cant fix the nock receiver to be more precise. I just bought a new one and it will not space the vanes evenly as it should. I have ask many questions and have had numerous answers , none have worked to my satisfaction. If the jig is suppose to apply vanes equally on the shaft with a simple dial, then I should not have push and re-adjust , on every vane, an still comes out wrong. I know everyone will say what I have all ready heard" Its just a little off, wont make that much differance." Maybe not to an average shooter, but for the price you pay, it should be closer than it is..

(Posted on 9/23/15)

Don't waste your money on anything else Review by Carli F
Value
Quality
Price

Simply the best jig you can buy. It's no wonder so many professionals use this. It's so easy. Really, if I can do it, anyone can. The instructions that come with it are confusing, so don't get disheartened if it doesn't make sense. Take them with a grain of salt. It's really simple. It has different settings but it arrived already set up for 3x120°, which is what I wanted. I haven't tried to change this, so I can't speak of the ease of that part. The only thing I had to play around with was the alignment so that it would fletch my Easton 1819s perfectly. It didn't take much time. I love being able to make and fix my own arrows at home. Best purchase ever!

(Posted on 3/1/15)

Great Flether! Review by dzinn
Value
Quality
Price

I have used a couple of other fletching tools that I have not been happy with. Speaking with a Techspert at Lancaster he suggested this tool. I just finished fletching aaeWAV vanes on Victory VAP arrows and it was amazing!

I set it up for Easton Aluminum arrows and it was quick and easy. The Jig is easy to center on shafts of varying diameters. It it easy to clean and I suggest wiping the tool between each mount with acetone.

The tool seems pricy but you get what you pay for. This is a top notch tool that will last a lifetime, It is accurate and easy to use. It is a very cost effective tool. Your end result will be better mountings.

(Posted on 2/26/15)

Excellent Jig! Review by Lee
Quality
Price
Value

This is a fantastic jig. I previously bought a plastic Bohning Blazer jig, but the difference in quality and finished fletching is like night and day. Spend a little more and get this Bitzenburger jig.

If you are fletching arrows with fixed knocks (glued on knocks), and mix both traditional fletching (cock feather left/right) and compound fletching styles (cock feather up/down), you will also need to buy an alternate Blitzenburger Nock Receiver.

Fully recommend this jig, It will last you a lifetime.

(Posted on 10/7/14)

Wouldn't Choose Anything Else Review by Tatertot
Quality
Price
Value

My coach suggested I get this fletcher because he has had his for about 20+years and still adores it and puts it to good use. Im so glad he suggested it! I've only tested out a few others but none compare. Most of the experienced archers I know (quite a few who own archery stores) love their Bitzenberger Fletching Jigs! After a year with one of my own and helping refletch many other's arrows, I can definitely see why everyone loves it. With it's easily adjustable settings, It's worth every cent!

(Posted on 11/30/13)

best there is Review by andy
Price
Value
Quality

This is the real deal works perfectly can be used on any kind of arrow with vanes or feathers of any size or type. All the other jigs are junk. This is what the pros use and for good reason.

(Posted on 8/2/13)

Best of the Best Review by Dale Frazier
Price
Value
Quality

I bought this fletching jig over 20 years ago, with the technology changing so drastically over this same time period, there still is nothing more accurate to fletch a arrow, or crossbow bolt with than this item right here.
I still use it today and have always had true arrow flight weather I used feathers or plastic.
It is adjustable to fit every application I have ever needed for fletching.
If you are looking for an arrow jig, this one will be something you can pass on to the generation following you.
Good luck and happy fletching.

(Posted on 11/18/12)

Good Review by Jfc
Quality
Price
Value

Most accurate fletching jig I have ever seem

(Posted on 10/2/12)

Write Your Own Review

Write Your Own Review

You're reviewing: Bitzenburger Fletching Jig

  •  
    1
    2
    3
    4
    5
    Quality
    Price
    Value
Log in to access this form without a captcha.

* Required Fields