Read 1 Customer ReviewsWrite Your Own Review
- Nicely made part, but nocks fit TOO tight! Review by JCT
Value Quality Price
I gave these low ratings because of the nock fit. The bushings are made and machined very well. They fit the arrow shafts very well. The problem I have with them is the Easton g nocks fit TOO tight. I put them in some GT ultralights and when I installed the nocks for the first time I almost could not get them in. The first time I damaged one and had to remove it the whole busning came out! Then when I tried to remove the nock it broke flush with the bushing. I installed them with Insert Iron so they would stay in, or so I thought. So if you buy these you will have to modify the inside of the bushing or sand down the nock stem to make them fit. These would get an excellent rating or 5 targets across the board from me if the nock fit wasn't so bad.
(Posted on 2/4/13)