Call a TechXPert™ 855.922.7769

Manufacturer Downloads



Related Resources



Live TechXpert™ Help

Talk to a TechXpert about Zenith Bitzenburger Upgrade Kit

Click Here to Chat with a TechXpert™

Zenith Bitzenburger Upgrade Kit

SKU# 7310037

$34.99

Item # 7310037

Catalog Page # 122

Upgrade kit for Bitzenburger fletching jigs.
Full Description
In stock
Zenith Archery Products
$34.99
Product Description
Product Description
Here's an ungrade kit for your Bitzenburger jig that will allow you to fletch skinny and fat arrows with perfection.

• Bitzenburger upgrade kit has introduced a new upgraded nock receiver for your Bitzenburger fletching jig
• The replacement body will fit directly into your jig and will still adjust for all three different fletching patterns
• Upgraded receiver comes with two inserts which are held into the body by a long screw which is tightened through the rear of the receiver
• One insert is sized to fit snuggly into any arrow which uses a G nock
• The second insert does arrows which use pin nocks, holding the pin by the hole in the insert. It also does arrows which use Super nocks (.246 carbon, Super Uni-bushings, etc.)
• If the pin holder becomes too loose, just gently squeeze the segments together with a small plier until it holds the pin tightly again
• This kit DOES NOT include a sleeve for X or H nocks
• An adjustable upper support plate is mounted using the template and hardware included with the kit
• Once the arrow is mounted in the jig, the plate is adjusted to support the upper end of the shaft
Manufacturer Downloads



Related Resources



Similar products

Customer Reviews

Customer Reviews

Read 3 Customer Reviews

Write Your Own Review
Great upgrade to the bitz Review by Dodgeman98
Price
Value
Quality

The only way to make a bitz better is this kit. It makes everything very precise.

(Posted on 3/12/19)

The upgrade works great...... unless you are doing X nock shafts Review by Mike
Value
Quality
Price

The X nock sleeve barely made it through 6 arrows before the sleeve was chewed up and unusable. The update kit works great, but someone at Zenith must hate X nock arrows. The sleeve leaves A LOT to be desired. If you are going to fletch X nock shafts buy extra sleeves. 5 stars if you arrow fits the nock receiver, 0 starts if you are trying to use one of the sleeves.

(Posted on 12/26/18)

Good upgrade, but finicky Review by Lev Gelb
Value
Quality
Price

A worthwhile upgrade to the Bitzenburger jig, especially for small diameter arrows. However, be warned: you need to drill holes in the jig itself to mount the new adjustable front notch for the shaft to rest on. (I managed with a hand drill and a small vice to hold the jig.) Also, the pin-holder is a little finicky; if it grips loosely, the arrow can rotate and you get bad alignments, if it grips too tightly, its really hard to get the pin in and out. So you have to adjust it to get the right tension (the included instructions do say that this will be necessary.)

(Posted on 11/8/18)

Write Your Own Review

Write Your Own Review

You're reviewing: Zenith Bitzenburger Upgrade Kit

  •  
    1
    2
    3
    4
    5
    Price
    Value
    Quality
Log in to access this form without a captcha.

* Required Fields