Pro Pick
Easton X10 ProTour Arrow Shafts
Easton X10 ProTour Arrow Shafts Easton X10 ProTour Arrow Shaft Review at LancasterArchery.com Easton X10 Easton Archery Experts - Target Arrow Design

Easton X10 ProTour Arrow Shafts

Item # 2070223

Catalog Page #
39
$422.99

Pack Qty: 12

Loading...

Maximum 15 characters

Lancaster Archery can custom cut your arrow shafts for you. Enter your precise shaft length as measured from end to end of the shaft, excluding any hardware (nocks, bushings, inserts and points). If you leave this field blank, your shafts will be shipped uncut at full length.
A compound archers first choice across the globe.
The Easton X10 Pro Tour Shaft is a competition-grade arrow built especially for compound bow shooters. The shaft is one diameter from the nock end to near the middle, and then it tapers down toward the point. This allows the arrow to have a small, wind-cutting front diameter, while maintaining a stiff spine to handle high compound draw weights.

• Since it's introduction the compound specific X10 ProTour has won more titles and set more records than all other choices
• Small outside diameter with a heavier mass weight reduces wind drift and increases accuracy
• High strength carbon fiber bonded to a 7075 alloy core
• Reverse taper design to deal with the force imparted by compound bows
• 9-micron polished carbon finish
• Guaranteed straightness: ± .0015"
• Weight Tolerance: ± 0.5 grains
• Components sold separately
• Sold by the dozen

770 (6.0 gpi), 720 (6.2 gpi), 670 (6.5 gpi), 620 (6.7 gpi), 570 (6.9 gpi), 520 (7.3 gpi), 470 (7.6 gpi), 420 (8.0 gpi), 380 (8.4 gpi)
More Information
ColorNo
MaterialCarbon/Aluminum
LengthNo
Gift SuggestionNo
Do Not Ship InternationalNo
Open BoxNo
RebateNo
Write Your Own Review
You're reviewing: Easton X10 ProTour Arrow Shafts
Your Rating